Rip Statistics; Management Processor Statistics; Packet Statistics - HP 438031-B21 - 1:10Gb Ethernet BL-c Switch Command Reference Manual

RIP statistics

Command: /stats/l3/rip
RIP ALL STATS INFORMATION:

Management Processor statistics

Command: /stats/mp
[MP-specific Statistics Menu]
The following table describes the Statistics Menu options for the management processor (MP):
MP-specific Statistics Menu options
Table 68
Command
pkt
tcb
ucb
cpu

Packet statistics

Command: /stats/mp/pkt
Packet counts:
allocs:
mediums:
jumbos:
smalls:
failures:
RIP packets received = 12
RIP packets sent = 75
RIP request received = 0
RIP response received = 12
RIP request sent = 3
RIP response sent = 72
RIP route timeout = 0
RIP bad size packet received = 0
RIP bad version received = 0
RIP bad zeros received = 0
RIP bad src port received = 0
RIP bad src IP received = 0
RIP packets from self received = 0
pkt - Show Packet stats
tcb - Show All TCP control blocks in use
ucb - Show All UDP control blocks in use
cpu - Show CPU utilization
Usage
Displays packet statistics, to check for leads and load.
Displays all Transmission Control Protocol (TCP) control blocks (TCB) that are in use.
Displays all User Datagram Protocol (UDP) control blocks (UCB) that are in use.
Displays CPU utilization for periods of up to 1, 4, and 64 seconds.
36692
0
0
0
0
frees:
mediums hi-watermark:
jumbos hi-watermark:
smalls hi-watermark:
Statistics Menu
36692
3
0
2
95