User Id Configuration - HP 438031-B21 - 1:10Gb Ethernet BL-c Switch Command Reference Manual

The following table describes the User Access Control menu options.
User Access Control Configuration menu options
Table 96
Command
uid <1-10>
eject <username>
usrpw <1-128 characters> Sets the user (user) password (maximum 128 characters). The user has no direct
opw <1-128 characters>
admpw <1-128 characters> Sets the administrator (admin) password (maximum 128 characters). The super
cur

User ID configuration

Command: /cfg/sys/access/user/uid
[User ID 1
The following table describes the User ID Configuration menu options.
Table 97 User ID Configuration menu options
Command
cos <user|oper|admin>
name <1-8 characters>
pswd <1-128 characters> Sets the user password of up to 128 characters maximum.
ena
dis
del
cur
Description
Displays the User ID Menu for the selected user.
Ejects the selected user from the switch.
responsibility for switch management. He or she can view switch status
information and statistics, but cannot make any configuration changes.
Sets the operator (oper) password (maximum 128 characters). The operator
manages all functions of the switch. He or she can view all switch information
and statistics and can reset ports or the entire switch.
user administrator has complete access to all menus, information, and
configuration commands on the switch, including the ability to change both the
user and administrator passwords.
Displays the current user status.
Menu]
cos - Set class of service
name - Set user name
pswd - Set user password
ena - Enable user ID
dis - Disable user ID
del - Delete user ID
cur - Display current user configuration
Description
Sets the Class-of-Service to define the user's authority level.
Defines the user name.
Enables the user ID.
Disables the user ID.
Deletes the user ID.
Displays the current user ID parameters.
Configuration Menu
124