HP 438031-B21 - 1:10Gb Ethernet BL-c Switch Command Reference Manual page 171

Hp 1:10gb ethernet bl-c switch for c-class bladesystem command reference guide
Hide thumbs Also See for 438031-B21 - 1:10Gb Ethernet BL-c Switch:
Table of Contents

Advertisement

The following table describes the Virtual Router Group Configuration Menu options.
Virtual Router Group Configuration Menu options
Table 154
Command
track
vrid <1-255>
if <1-255>
prio <1-254>
adver <1-255>
preem disable|enable
ena
dis
del
cur
Description
Displays the VRRP Priority Tracking Menu for the virtual router group. Tracking is a
proprietary extension to VRRP, used for modifying the standard priority system
used for electing the master router.
Defines the virtual router ID.
The vrid for standard virtual routers (where the virtual router IP address is not the
same as any virtual server) can be any integer between 1 and 255. All vrid
values must be unique within the VLAN to which the virtual router's IP interface
(see if below) belongs. The default virtual router ID is 1.
Selects a switch IP interface. The default switch IP interface number is 1.
Defines the election priority bias for this virtual router group. This can be any
integer between 1 and 254. The default value is 100.
During the master router election process, the routing device with the highest
virtual router priority number wins. If there is a tie, the device with the highest IP
interface address wins. If this virtual router's IP address (addr) is the same as the
one used by the IP interface, the priority for this virtual router will automatically be
set to 255 (highest).
When priority tracking is used (/cfg/l3/vrrp/track or
/cfg/l3/vrrp/vr #/track), this base priority value can be modified
according to a number of performance and operational criteria.
Defines the time interval between VRRP master advertisements. This can be any
integer between 1 and 255 seconds. The default is 1.
Enables or disables master preemption. When enabled, if the virtual router group
is in backup mode but has a higher priority than the current master, this virtual
router will preempt the lower priority master and assume control. Note that even
when preem is disabled, this virtual router will always preempt any other master
if this switch is the owner (the IP interface address and virtual router addr are the
same). By default, this option is enabled.
Enables the virtual router group.
Disables the virtual router group.
Deletes the virtual router group from the switch configuration.
Displays the current configuration information for the virtual router group.
Configuration Menu
171

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

1:10gbe

Table of Contents