Acl Re-Mark Configuration; Acl Re-Mark In-Profile Configuration - HP 438031-B21 - 1:10Gb Ethernet BL-c Switch Command Reference Manual

Table 165 ACL Meter Configuration Menu options
Command
mbsize <32-4096>
enable e|d
dpass drop|pass
reset
cur

ACL Re-mark configuration

Command: /cfg/acl/acl <1-896>/re-mark
[Re-mark Menu]
You can choose to re-mark IP header data for the selected ACL. You can configure different remark
values, based on whether packets fall within the ACL Metering profile, or out of the ACL Metering profile.
ACL Re-mark Configuration Menu options
Table 166
Command
inprof
outprof
reset
cur

ACL Re-mark In-Profile configuration

Command: /cfg/acl/acl <1-896>/re-mark/inprof
[Re-marking - In Profile Menu]
ACL Re-mark In-Profile Configuration Menu options
Table 167
Command
up1p
updscp <0-63>
reset
Description
Configures the maximum burst size, in Kilobits. Enter one of the following values for
mbsize: 32, 64, 128, 256, 512, 1024, 2048, or 4096.
Enables or disables metering on the ACL.
Configures the ACL Meter to either drop or pass out-of-profile traffic.
Reset ACL Metering parameters to their default values.
Displays the current ACL metering parameters.
inprof - In Profile Menu
outprof - Out Profile Menu
reset - Reset re-mark settings
cur - Display current settings
Description
Displays the Re-mark In-Profile Menu.
Displays the Re-mark Out-of-Profile Menu.
Reset ACL Re-mark parameters to their default values.
Displays the current ACL re-mark parameters.
up1p - Set Update User Priority Menu
updscp - Set the update DSCP
reset - Reset in profile settings
cur - Display current settings
Description
Displays the Re-Mark In-Profile Update User Priority Menu.
Sets the DiffServ Code Point (DSCP) of In-Profile packets to the selected value.
Resets the update DSCP parameters to their default values.
Configuration Menu
179