IGMP multicast router information
Command: /info/l3/igmp/mrouter
[IGMP Multicast Router Menu]
The following table describes the commands used to display information about multicast routers learned
through IGMP Snooping.
IGMP Multicast Router menu options
Table 36
Command
vlan <1-4094>
dump
IGMP Mrouter dump
Command: /info/l3/igmp/mrouter/dump
VLAN
------- ------- --------- -------- ---------------------- ---- --
1
2
3
IGMP Mrouter information includes:
VLAN and port where the Mrouter is connected
IGMP version
Mrouter expiration
Maximum query response time
Querier's Robustness Variable (QRV)
Querier's Query Interval Code (QQIC)
VRRP information
Virtual Router Redundancy Protocol (VRRP) support on the HP 1:10GbE switch provides redundancy
between routers in a LAN. This is accomplished by configuring the same virtual router IP address and ID
number on each participating VRRP-capable routing device. One of the virtual routers is then elected as
the master, based on a number of priority criteria, and assumes control of the shared virtual router IP
address. If the master fails, one of the backup virtual routers will assume routing authority and take control
of the virtual router IP address.
Command: /info/l3/vrrp
VRRP information:
1: vrid 2, 205.178.18.210, if 1, renter, prio 100, master, server
2: vrid 1, 205.178.18.202, if 1, renter, prio 100, backup
3: vrid 3, 205.178.18.204, if 1, renter, prio 100, master, proxy
vlan - Show all multicast router ports on a single vlan
dump - Show all learned multicast router ports
Usage
Displays information for all multicast groups on a single VLAN.
Displays information for all multicast groups learned by the switch.
Port
Version
21
V3
23
V2
24
V2
Expires
Max Query Resp. Time
4:09
128
4:09
125
static
unknown
Information Menu
QRV QQIC
2
125
-
-
-
-
60