Download  Print this page

Snmpv2 Trap Host Configuration; Snmpv3 Trap Host Configuration - HP 438031-B21 - 1:10Gb Ethernet BL-c Switch Application Manual

Hp 1:10gb ethernet bl-c switch for c-class bladesystem application guide.
Hide thumbs


SNMPv2 trap host configuration

The SNMPv2 trap host configuration is similar to the SNMPv1 trap host configuration. Wherever you
specify the model, specify snmpv2 instead of snmpv1.
c/sys/ssnmp/snmpv3/usm 10
name "v2trap"
/c/sys/ssnmp/snmpv3/access 10
/c/sys/ssnmp/snmpv3/group 10
/c/sys/ssnmp/snmpv3/notify 10
/c/sys/ssnmp/snmpv3/taddr 10
/c/sys/ssnmp/snmpv3/tparam 10
/c/sys/ssnmp/snmpv3/comm 10

SNMPv3 trap host configuration

To configure a user for SNMPv3 traps, you can choose to send the traps with both privacy and
authentication, with authentication only, or without privacy or authentication. Use the following commands
to configure the access table:
/c/sys/ssnmp/snmpv3/access <x>/level
/c/sys/ssnmp/snmpv3/tparam <x>
Configure the user in the user table to match the configuration of the access table.
It is not necessary to configure the community table for SNMPv3 traps because the community string is not
used by SNMPv3.
name "v2trap"
model snmpv2
nview "iso"
model snmpv2
uname v2trap
gname v2trap
name v2trap
tag v2trap
name v2trap
taglist v2trap
pname v2param
name v2param
mpmodel snmpv2c
uname v2trap
model snmpv2
index v2trap
name public
uname v2trap
(Configure user named "v2trap")
(Define access group to view SNMPv2 traps)
(Assign user to the access group)
(Assign user to the notify table)
(Define an IP address to send traps)
(Specify SNMPv2 traps to send)
(Define the community string)
Accessing the switch


Table of Contents

   Related Manuals for HP 438031-B21 - 1:10Gb Ethernet BL-c Switch

This manual is also suitable for:


Comments to this Manuals

Symbols: 0
Latest comments: