Changing The Railing Extensions At Floor Levels; Changing The Railing Extensions At Landings - Autodesk 24108-051400-9000 - AutoCAD Revit Architecture Suite 2008 User Manual

If you want to
include fixed posts at the corners of the railing
include dynamic posts with the railing
include balusters with the railing
specify the height of all balusters from the floor
specify the maximum distance between the balusters
override the number of balusters on each stair tread
5 If you want to undo your changes and revert to the values set in the railing style, click Reset to Style Values.
6 Click OK.

Changing the Railing Extensions at Floor Levels

Use this procedure to control the length of the handrail and guardrail extensions at the top and bottom of stair flights.
If a bottom rail exists, it extends as far as the railing above it.
NOTE If these settings are unavailable, they are controlled by the railing style. You cannot modify them for individual railings.
1 Double-click the railing for which you want to change the extensions.
2 Expand Basic, and expand Dimensions.
3 Click the setting for Railing Extensions.
4 Specify the railing extension properties:
If you want to
use values in this dialog box to specify extensions
specify the length of the handrail and guardrail at the top of
an entire stair
specify the length of the handrail and guardrail at the bottom
of an entire stair
5 If you want to undo your changes and revert to the values set in the railing style, click Reset to Style Values.
6 Click OK.

Changing the Railing Extensions at Landings

Use this procedure to control the length of the handrail and guardrail extensions at landings. If a bottom rail exists, it
extends as far as the railing above it.
NOTE If these settings are unavailable, they are controlled by the railing style. You cannot modify them for individual railings.
1 Double-click the railing for which you want to change the extensions.
2 Expand Basic, and expand Dimensions.
3 Click the setting for Railing Extensions.
1268 | Chapter 26 Railings
Then
select Fixed Posts at Railing Corners.
select Dynamic Posts. You can then enter a value for
Maximum Center to Center Spacing.
select Balusters.
enter a value for Extension of Balusters from Floor Level.
enter the appropriate value for Maximum Center to Center
Spacing.
select Stair Tread Length Override. You can then enter a value
for Number per Tread. (This applies only to railings that are
attached to stairs.)
Then
clear Use Stair Landing Extension.
enter values for Handrail and Guardrail. Select + T next to the
value to add the tread length to the extension value.
enter values for Handrail and Guardrail. Select + T next to the
value to add the tread length to the extension value.