Changing The Aec Polygon Style; Merging Two Aec Polygons - Autodesk 24108-051400-9000 - AutoCAD Revit Architecture Suite 2008 User Manual

Offsetting the edges of an AEC Polygon using its Vertex grip
3 Edit the vertex as necessary:
If you want to
move the vertex
remove the vertex
move the vertex and the adjacent edges
4 Right-click, and click Deselect All to turn off grips.

Changing the AEC Polygon Style

Use this procedure to change the style of one or more AEC Polygons. The style controls the width and justification of
the AEC Polygon edges. The justification determines whether the edges are displayed inside, outside, or centered on
the vertices of the AEC Polygon. The style can also control the display properties of the AEC Polygon.
1 Double-click the AEC Polygon you want to change.
2 On the Properties palette, expand Basic, and expand Location.
3 Select an AEC Polygon style.

Merging Two AEC Polygons

Use this procedure to merge two or more AEC Polygons in a drawing. When you merge two AEC Polygons that overlap
each other, their common boundary is combined to form the boundary of the merged AEC Polygon.
NOTE When you merge one AEC Polygon with another, the properties of the merged AEC Polygon are identical to the
properties of the first selected AEC Polygon.
1 Create two overlapping AEC Polygons. For more information, see
2 Select one of the AEC Polygons to be merged, right-click, and click AEC Modify Tools
988 | Chapter 21 AEC Polygons
Then
move the vertex to the desired location and click; or enter a
value, and press ENTER.
press CTRL to switch to the Remove Vertex edit mode, and
click to confirm the removal.
press CTRL twice to switch to the Offset Edges edit mode.
Move the vertex to the desired location, and click; or enter a
value, and press ENTER.
Creating an AEC Polygon" on page 980.
Merge.