Viewing Product and Fabric Data
Viewing Fabric Information
Options on the View panel of the EWS interface enable you to see information
about the fabric in which a product participates. You can view each of the
following:
Viewing Operating Parameters for a Fabric
To view the Operating Parameters of a product, perform the following procedure:
1. Choose View from the navigation panel.
2. Choose the Operating Parameters tab. The Operating Parameters tab view
This tab view shows the following Switch Parameters information for the
product:
Viewing Fabric Directors and Switches
To view information about the HP high availability fabric directors and switches
on a menu, perform the following procedure:
1. Choose View from the navigation panel.
2. Choose the Fabric tab and the Products tab. The Products tab view displays
110
Operating parameters for a fabric.
Information about each of the devices that make up the fabric.
Topology of the fabric.
displays
(Figure
30) showing Switch Parameters and Fabric Parameters.
BB Credit — the BB_Credit value for the fabric (not available on the
Edge Switch 2/24).
R_A_TOV — Resource Allocation Time Out Value (R_A_TOV) used by the
fabric. Specified in tenths of a second.
E_D_TOV — Error Detection Time Out Value (E_D_TOV) value used by
the fabric. Specified in tenths of a second.
Switch Priority — Priority value of the switch. Values can be Default,
Principal, and Never Principal.
Interop Mode — Interoperability mode of the fabric. Values can be
Homogenous Fabric and Open Fabric 1.0. (This field is not valid if the
product's Operation Mode is S/390.)
(Figure
31).
Embedded Web Server User Guide