•
See
resource names and UNC
Wait
Halts a job for a period of time. When the time has elapsed, the job proceeds to the next step.
Syntax and arguments
When initially inserted into a job, the command syntax and default arguments are:
Wait ( "0:0:10" )
Timespan. Enter the amount of time to wait. The format is hours:minutes:seconds (hh:mm:ss)
Examples
Wait ( "1:15:0" )
Comments
•
Associated validation commands. None
•
Agent and license prerequisites. None
•
Command result value. None. For a complete list, see
•
OS specifics. None
WaitDrGroupNormalization
Halts a job until all of the storage volumes (virtual disks) in a DR group are normalized (unshared). When
all of the volumes are normalized, the job proceeds to the next step.
Syntax and arguments
When initially inserted into a job, the command syntax and default arguments are:
WaitDrGroupNormalization ( %drgroup_unc_name% )
UNC DR Group Name (%drgroup_unc_name%). Select or enter the name of the DR group to check
for normalization.
Examples
WaitDrGroupNormalization ( "\\ArrayA2\DrGrpPets" )
Comments
•
Associated validation commands. None
•
Agent and license prerequisites. Requires remote replication licenses on the source and
destination storage systems.
•
Command result value. None. For a complete list, see
•
OS specifics. None
•
The storage volumes in the DR group are checked at regular intervals. When all volumes are
normal or unshared, the job proceeds to the next step. While any volume in the DR group is
normalizing or unsharing, the job continues to check.
•
See
resource names and UNC
formats.
– Halts the job for a period of 1 hour, 15 minutes, and 0 seconds.
formats.
command result
command result
HP StorageWorks Replication Solutions Manager 4.0.1
values.
values.
365