Setdrgroupautosuspend; Setdrgroupcomments - HP 418800-B21 - StorageWorks Modular Smart Array 70 Storage Enclosure User Manual

Examples
SetDiskGroupForSnapclone ( "ArrayA2", "DskGrp3" )
Comments
• Associated validation commands. None
• Agent and license prerequisites. Requires a local replication license for the storage system.
• Command result value. None. For a complete list, see
• OS specifics. None
• This command is not required in jobs that create snapclones. If omitted from a job, the storage
system default for the disk group is applied.
• Selection of the disk group for snapclones a controller software dependent feature.
• See resource names and UNC

SetDrGroupAutoSuspend

Specifies auto suspend mode of a DR group pair.
Syntax and arguments
When initially inserted into a job, the command syntax and default arguments are:
SetDrGroupAutoSuspend ( %drgroup_unc_name%, FALSE )
UNC DR Group Name (%drgroup_unc_name%). Select or enter the UNC name of the source or
destination DR group in the DR group pair.
Auto Suspend. To enable this mode select true, to disable select false.
Examples
SetDrGroupAutoSuspend ( "\\ArrayA2\DrGrpPets", FALSE )
Comments
• Associated validation commands. None.
• Agent and license prerequisites. Requires remote replication licenses on the source and
destination storage systems.
• Command result value. None. For a complete list, see
• OS specifics. None.
• When a job is run, some job arguments may specify features that are not available on the
target array.
• See resource names and UNC

SetDrGroupComments

Creates or replaces the comment about a source or destination DR group.
Syntax and arguments
When initially inserted into a job, the command syntax and default arguments are:
SetDrGroupComments ( %drgroup_unc_name%, "" )
UNC DR Group Name (%drgroup_unc_name%). Select or enter the UNC name of the DR group to
be changed.
command result
formats.
command result
formats.
HP StorageWorks Replication Solutions Manager 4.0.1
values.
values.
313