Forcing A Full Copy; Launching The Device Manager; Listing Individual Resource Events - HP 418800-B21 - StorageWorks Modular Smart Array 70 Storage Enclosure User Manual
Hp storageworks replication solutions manager 4.0.1 user guide (t3680-96308, june 2008)
Hide thumbs
Also See for 418800-B21 - StorageWorks Modular Smart Array 70 Storage Enclosure:
- Command reference manual (207 pages) ,
- Maintenance and service manual (63 pages) ,
- User manual (60 pages)
Table of Contents
Advertisement
2.
On the List tab, select the destination group in the DR group pair to failover.
3.
Select Actions > Failover. The Confirm Failover window appears.
4.
If supported by controller software, an option to suspend remote replication is enabled. Select
Suspend on failover to suspend remote replication immediately after the failover is executed.
IMPORTANT:
Do not perform this action when the links are down
so can create an invalid source-source configuration. See
5.
Click OK.
Forcing a full copy
Force a full copy in a DR group pair. See DR groups
Considerations
•
You can use the GUI, jobs, or the CLUI. See DR groups
•
Guidelines apply. See
•
To force a full copy in a DR group pair, you must specify the source DR group. See
Procedure
This procedure uses the GUI.
1.
In the navigation pane, select DR Groups.
2.
On the List tab, select the source group in the DR group pair to force a full copy.
3.
Select Actions > Force Full Copy.
4.
Click OK.
Launching the device manager
Access HP Command View EVA from the replication manager. Each time you use this action in the same
replication manager session, a new window for HP Command View EVA is opened.
Considerations
•
You can only use the GUI to launch the device manager. The action is not available unless an
individual resource is selected (highlighted) in the replication manager content pane.
•
You must know the security credentials (user name and password) to log on to HP Command
View EVA.
Procedure
1.
In the navigation pane, select DR Groups, Storage Systems or Virtual Disks.
2.
On a List or Tree tab select any storage resource.
3.
Select Actions > Launch the Device Manager. A new browser window opens.
4.
Respond to the security alert message and then log on to HP Command View EVA.
Listing individual resource events
Display the events for an individual resource.
remote replication
guidelines.
HP StorageWorks Replication Solutions Manager 4.0.1
, especially during an unplanned failover. Doing
invalid DR group pair - source and
full
copy.
actions cross
reference.
source.
DR group
pair.
91
Advertisement
Table of Contents
Troubleshooting
