Clui Ports Configuration; Rsm Database Configuration; Rsm Database Cleanup; Internet Protocol Configurations - HP 418800-B21 - StorageWorks Modular Smart Array 70 Storage Enclosure User Manual

2. In the Configuration navigation pane, select the item to configure.
CLUI ports configuration
You can configure the ports that are used by CLUI clients to access the CLUI server.
• Default:
Unsecure port: enabled, port 9000, 10 simultaneous sessions
Secure SSL port: enabled, port 9001, 10 simultaneous sessions
• HP recommends not changing a default port number unless it conflicts with other applications
on the management server.
• To allow unlimited simultaneous sessions, enter zero (0) in the Maximum Sessions box.
For the procedure, see
RSM database configuration
You can configure the port that the replication manager server uses to access its internal database. You
can also review the database size and compact it.
Database port
• Default: port 1315.
• HP recommends not changing the default unless the port conflicts with other applications on the
management server.
Database size and compaction
• The size of the replication manager database is displayed in the configuration window.
• You can compact the database to remove unused space. Compaction does not take effect until
the replication manager server (service) is restarted.
For the procedure, see

RSM database cleanup

You can remove records of unavailable storage resources from the database by using the cleanup feature.
• Over time, the database can accumulate records of resources on storage systems that the
replication manager can no longer communicate with.
• HP recommends exporting a copy of the database (as backup) before performing a cleanup.
See exporting an RSM
For the procedure, see
Internet Protocol configurations
Replication Solutions Manager is designed for use with internet protocol versions as follows:
• Replication Solutions Manager versions 4.0.1 — IPv4, IPv6, and mixed IPv4/IPv6 networks
• Replication Solutions Manager versions 1.0 through 4.0 — IPv4 networks only
IP address formats
IP addresses in IPv6 have a different format than IPv4.
• IPv6 IP addresses are generally shown in eight groups of four hexadecimal digits, separated by
colons, for example, 2001:0db8:85a3:08d3:1319:8a2e:0370:7334 .
36
Replication Solutions Manager
accessing the configuration
accessing the configuration
database.
accessing the configuration
window.
window.
window.