Adding Storage Systems To A Managed Set; Checking And Printing Storage System Licenses; Launching The Device Manager - HP 418800-B21 - StorageWorks Modular Smart Array 70 Storage Enclosure User Manual

DR group Source/Destination tree view

Adding storage systems to a managed set

Add storage systems to a managed set.
Considerations
• You can use the GUI or CLUI. See storage systems
Procedure
This procedure uses the GUI.
1.
In the navigation pane, select Storage Systems.
2. On the List tab, select the storage systems to add to a managed set.
3.
Select Actions > Add to Managed Set. The Create New Managed Set window opens.
4.
Select a managed set, or select Create New Managed Set and enter a name.
5. Click OK.

Checking and printing storage system licenses

Check and print the status of replication licenses and application-integration licenses for a specific
storage array.
1.
In the navigation pane, select Storage Systems. The Storage Systems content pane opens.
2. Select a storage system.
3.
Select Actions > View Properties. The Storage Properties window opens.
4.
Select the Licensing tab.
5. Click the Print button or select Actions > Print.

Launching the device manager

Access HP Command View EVA from the replication manager. Each time you use this action in the same
replication manager session, a new window for HP Command View EVA is opened.
Considerations
• You can only use the GUI to launch the device manager. The action is not available unless an
individual resource is selected (highlighted) in the replication manager content pane.
• You must know the security credentials (user name and password) to log on to HP Command
View EVA.
actions cross reference.
HP StorageWorks Replication Solutions Manager 4.0.1
405