Forcefullcopydrgroup - HP 418800-B21 - StorageWorks Modular Smart Array 70 Storage Enclosure User Manual

Syntax and arguments
When initially inserted into a job, the command syntax and default arguments are:
FlushCache ( %hostvol_unc_names% )
Host Volume UNC Names (%hostvol_unc_names%). Select or enter the UNC names of the host volumes
(on an enabled host) whose caches are to be flushed.
Examples
These examples show host volume mount points. Device names can also be used.
AIX
HP-UX
Linux
OpenVMS
Solaris
Tru64 UNIX
Windows
Drive
Drive & folders
Comments
• Associated validation commands. ValidateHostVolume.
• Agent and license prerequisites. Requires a host agent.
• Command result value. None. For a complete list, see
• OS specifics. Yes. See examples above.
resource names and UNC
• See

ForceFullCopyDrGroup

Forces a full copy of a DR group pair. The data is copied directly from the source group virtual disk to the
destination group, without using any data in the log disk.
Syntax and arguments
When initially inserted into a job, the command syntax and default arguments are:
ForceFullCopyDrGroup ( %drgroup_unc_name% )
UNC DR Group Name ( %drgroup_unc_name% ). Select or enter the UNC name of the source DR
group from which the full copy is to be initiated.
Examples
ForceFullCopyDrGroup ( "\\ArrayB2\DrGrpPets" )
Comments
• Associated validation commands. None.
• Agent and license prerequisites. Requires remote replication licenses on the source and
destination storage systems.
JFS, VFS
FlushCache ( "\\HostA2\/home/cats" )
HFS, VxFS
FlushCache ( "\\HostA2\/users/cats" )
Ext2, Ext3
FlushCache ( "\\HostA2\/var/cats" )
~
Not required
UFS, VxFS
FlushCache ( "\\HostA2\/usr/cats" )
AdvFS, UFS
FlushCache ( "\\HostA2\dom01#fset1" )
NTFS
FlushCache ( "\\HostA2\E:\" )
FlushCache ( "\\HostA2\E:\pets\cats" )
formats.
command result
HP StorageWorks Replication Solutions Manager 4.0.1
values.
289