WaitDrGroupSynchronizationTransition
Halts a job until the I/O mode of a DR group changes. When the I/O mode changes, the job proceeds
to the next step.
Syntax and arguments
When initially inserted into a job, the command syntax and default arguments are:
WaitDrGroupSynchronizationTransition ( %drgroup_unc_name% )
UNC DR Group Name (%drgroup_unc_name%). Select or enter the UNC name of the DR group to
check for an I/O mode (synchronization) change.
Examples
WaitDrGroupSynchronizationTransition ( "\\ArrayA2\DrGrpPets" )
Comments
•
Associated validation commands. None.
•
Agent and license prerequisitesRequires remote replication licenses on the source and destination
storage systems.
•
Command result value. None. For a complete list, see
•
OS specifics. None.
•
See also
SetDrGroupIoMode
•
See
resource names and UNC
WaitForHostDiskDeviceWriteCacheFlush
Halts a job until the write cache has been flushed for the storage volume (virtual disk) that underlies a
host disk device. When the write cache has been flushed, the job proceeds to the next step.
Syntax and arguments
When initially inserted into a job, the command syntax and default arguments are:
WaitForHostDiskDeviceWriteCacheFlush ( %hoststorvol_unc_name% )
UNC Host Disk Device Name (%hoststorvol_unc_name%). Select or enter the UNC name of the host disk
device to check for completion of a write-cache flush.
Examples
AIX
HP-UX
Linux
OpenVMS
Solaris
Tru64 UNIX
Windows
366
Jobs
command.
formats.
WaitForHostDiskDeviceWriteCacheFlush ( "\\HostA2\/dev/dsk/hd1" )
WaitForHostDiskDeviceWriteCacheFlush ( "\\HostA2\/dev/dsk/c2t0d2" )
WaitForHostDiskDeviceWriteCacheFlush ( "\\HostA2\/dev/sda3" )
WaitForHostDiskDeviceWriteCacheFlush ( "\\HostA2\$1$DGA2:" )
WaitForHostDiskDeviceWriteCacheFlush ( "\\HostA2\/dev/dsk/c0t5d0s6" )
WaitForHostDiskDeviceWriteCacheFlush ( "\\HostA2\/dev/disk/dsk100c" )
WaitForHostDiskDeviceWriteCacheFlush ( "\HostA2\Disk3" )
command result
values.