Discoveryrefresh (Obsolete) - HP 418800-B21 - StorageWorks Modular Smart Array 70 Storage Enclosure User Manual

DiscoveryRefresh (obsolete)

NOTE:
This command is obsolete. See comments below for details.
The command causes the replication manager to check its database for available resources. The
command was previously used to ensure that resource properties from the database are used in
conjunction with job commands, rather than using properties from the server cache memory, which
might not have been up to date.
Syntax and arguments
When initially inserted into a job (with a prior version), the command syntax and default arguments were:
DiscoveryRefresh (
No parameters are required.
Examples
DiscoveryRefresh ( )
Comments
• Associated validation commands. None
• Agent and license prerequisites. None
• Command result value. None. For a complete list, see
• OS specifics. None
• The DiscoveryRefresh command is obsolete as of version 2.0; however, the command can appear
in jobs that were created with prior versions of the replication manager.
• HP recommends that you remove the command from previously created jobs.
Exit
Adds an exit point to the job and defines the resulting job return code. See job exits.
Syntax and arguments
When initially inserted into a job, the command syntax and default arguments are:
Exit ( SUCCESS )
Exit Status. Select or enter a job status for this exit point. Choices are success and failure. Choose
success to terminate the job and issue a return code indicating successful job execution. Choose failure to
terminate the job and issue a return code indicating failed job execution.
Examples
Exit ( SUCCESS )
Exit (FAILURE)
286
Jobs
)
command result values.