Copy State; Destination Access Mode; Dr Group States And Icons - HP 418800-B21 - StorageWorks Modular Smart Array 70 Storage Enclosure User Manual

Site 1
source (a)
The result is that a point-in-time replica of the source exists at two different sites.

Copy state

Copy state identifies the state of remote replication between a source and destination virtual disk.
Values are:
• Normal. Remote replication involving the virtual disk is normal. There is no logging or merging
involving the virtual disk.
• Full Copy. The DR Group log threshold has been reached and the virtual disk is involved in
a full copy. See DR groups

Destination access mode

Destination access mode specifies the type of host I/O that is allowed when a virtual disk is in a
destination (remote copy) role. Values are:
• None. The virtual disk cannot be presented to any hosts.
• No Read. The virtual disk can be presented to hosts, but no reads (or writes) are allowed.
• Read Only. The virtual disk can be presented to hosts for read only.
The no read mode allows SCSI inquiry but prohibits host reads. This mode is typically used to support
host clusters.
Controller software versions
Implementation of this feature is controller software dependent. See
controller software features - remote

DR group states and icons

Icons in the DR group content pane indicate the key states of each DR group. You can mouse over an
icon to display a detailed state message.
1. Operational state
2. Failsafe state
100 DR Groups
Site 2
>>>
remote copy (b)
\/
snapclone
\/
snapclone (c)
full copy mode.
replication.
3. Suspension state
4. Log state
Site 3
>>>
remote copy (d)