Completing Imports; Troubleshooting; Troubleshooting - General; All Storage Resources In Unknown State - HP 418800-B21 - StorageWorks Modular Smart Array 70 Storage Enclosure User Manual

2. Enter the network name or IP address of the remote management server.
3.
Enter the user name and password to access the remote instance of the replication manager.
4. Click OK. An implicit job is started. The results and number of processed resources appear in
the Monitor job window. See
5. After importing, perform required follow up procedures to ensure that all required resources are
available. See

Completing imports

After an import is run, perform the following procedures, as appropriate:
IMPORTANT:
These procedures help ensure that resources, jobs, and managed sets are available after importing an RSM
database.
• Re-enter the password to access the local instance of HP Command View EVA. See
storage management server
• Re-enter the security credentials that are required to access enabled hosts. See
setting security credentials for enabled
• Re-enter the security credentials required to access Oracle databases, if any. See
setting security credentials for Oracle
• Re-enter the security credentials for imported scheduled job events, if any. See
editing scheduled job events
• Re-enable scheduled job events to run automatically.
Enabling and disabling scheduled job
• Re-configure the replication manager to use an e-mail server for jobs notification, if any. See
jobs email server
• HP recommends that administrators examine the active database for duplicate jobs and managed
sets and make corrections, as necessary. See

Troubleshooting

Troubleshooting - General

All storage resources in unknown state

Problem
The status of all storage systems, DR groups, and virtual disks have changed to an unknown state.
Explanation / resolution
The RSM administrator should check if the replication manager database was recently imported
from another management server. See
management server passwords are different. Passwords for the active and standby management servers
must match for the database import to succeed.
To change the password for a management server:
1. From the toolbar, select Tools > Configure > Storage Access > Management Server.
2. Select the management server for which you want to change the password. The server shows a
state of authorization_failure or bad_connection.
3.
Click Properties.
4.
In the Storage Agent Login area, Agent Password box, enter the correct password.
44
Replication Solutions Manager
implicit job
completing an import.
configuration.
hosts.
databases.
and security credentials for the
events.
configuration.
resources
startup.
server.
See
about imports.
database. If so, the problem is probably that the