Unpresenting Virtual Disks; Viewing Virtual Disks - HP 418800-B21 - StorageWorks Modular Smart Array 70 Storage Enclosure User Manual

Procedure
The following procedure uses the GUI.
1. In the navigation pane, select Virtual Disks.
2. On the List tab, select the fractured mirrorclone to resynchronize with its source. Alternately, you
can select the mirrorclone's source virtual disk.
3.
Select Actions > Resync Mirrorclone. The Resync Mirrorclone confirmation window opens.
4.
Click OK. The window closes.
5.
The Monitor Job window opens. An implicit job is begun to execute the action. See jobs
implicit job
6.
After the implicit job completes, refresh the content pane to display the most current resources.
See refreshing display

Unpresenting virtual disks

Unpresent a virtual disk from a host. See
Considerations
• You can use the GUI, jobs, or the CLUI to present a virtual disk to a host. See virtual disks
actions cross
• You can select multiple virtual disks to unpresent at one time.
CAUTION:
When presentation is removed, the host can no longer perform I/O with the virtual disk. This can cause
loss of host application data.
Procedure
This procedure uses the GUI.
1.
In the navigation pane, select Virtual Disks.
2. On the List tab, select one or more virtual disks to unpresent from enabled hosts.
3. Select Actions > Remove Presentation. The Remove Presentations window opens. Follow the
instructions in the window.

Viewing virtual disks

Display virtual disk list and tree views. See virtual disk views.
Considerations
• You can use the GUI or CLUI to display lists. See virtual disks
• Tree views are available only in the GUI.
Procedures
This procedure uses the GUI.
1. In the navigation pane, select Virtual Disks. The content pane displays virtual disks.
2. Click the List tab. A tabular list of storage systems is displayed.
3.
Click the Tree tab. A graphical tree of storage systems and their virtual disks is displayed.
426
Virtual disks
startup.
panes.
reference.
virtual disk presentation.
actions cross reference.