HP 418800-B21 - StorageWorks Modular Smart Array 70 Storage Enclosure User Manual page 115

List view
Host/Host Vol/Mt Point tree view
Adding enabled hosts
Add and enabled host to the replication manager database. After an enabled host is added, the host
can interact with the replication manager.
Considerations
• You can use the GUI or the CLUI. See enabled hosts
• Before an enabled host can be added, an administrator must first install the appropriate
OS-specific HP Replication Solutions Manager host agent software on the host and ensure the
agent is running correctly.
• To add the host, the administrator must know that fully qualified network name or IP address
of the host.
• HP recommends using the same host name in Command View EVA and HP Replication Solutions
Manager to identify each host. This provides consistency in both interfaces when presenting a
virtual disk to a host.
Procedure
This procedure uses the GUI.
1.
In the navigation pane, select Enabled Hosts.
2. On the List tab, select Actions > New. The New Enabled Host window opens. Follow the
instructions in the window.
Adding enabled hosts to a managed set
Add enabled hosts to a managed set.
actions cross reference.
HP StorageWorks Replication Solutions Manager 4.0.1
1 15