IMPORTANT:
New enabled hosts are not automatically discovered or added to the database. To be visible to the
replication manager, an administrator must manually add them after installing replication manager
host agents.
•
You can change the automatic storage refresh interval. See
•
When new resources are found, it may take some time to gather the new information and add it
to the RSM database.
Refreshing resources (global)
Update replication manager database entries by manually performing a global discovery and refresh of
resources.
Considerations
•
Manual refresh
IMPORTANT:
HP recommends that you manually refresh storage resources after using another interface that
changes the properties of storage systems, DR groups, or virtual disks. Refreshing resources,
especially storage resources, can take a significant amount of time and place heavy demands on
the management server and storage systems.
•
Information in the content pane is not automatically updated after a refresh.
Procedure
1.
On the toolbar, click the refresh icon.
1. Global refresh icon on toolbar
2.
The Global Refresh Monitor window appears. See
3.
You can do one of the following:
• Click Close to close the window and continue working.
• View the refresh progress bars.
• Click Refresh to restart the refresh.
4.
Update the content pane. See
Refreshing individual resources
Update replication manager database entries by manually performing a discovery and refresh of
individual resources.
Considerations
•
Individual resource refresh is only available for DR groups, enabled hosts, and virtual disks.
global refresh
refreshing display
panes.
HP StorageWorks Replication Solutions Manager 4.0.1
configuring the replication
monitor.
manager.
61