Sethostvolumeswritecachemode; Setlistvariable - HP 418800-B21 - StorageWorks Modular Smart Array 70 Storage Enclosure User Manual

SetHostVolumesWriteCacheMode

Enables or disables (stops and flushes) the write cache of the storage volumes (virtual disks) that underlie
host volumes.
When the job is run, the virtual disk write cache mode is enabled or disabled as specified. If the write
cache mode is already as specified, no change in operation occurs.
Syntax and arguments
When initially inserted into a job, the command syntax and default arguments are:
SetHostVolumesWriteCacheMode ( %hostvolume_unc_names%, WRITE_CACHE_ENABLED, NOWAIT )
Host Volumes Names (%hostvol_unc_name%). Select or enter the names of the host volumes (on an
enabled host) whose write cache mode are to be set.
Write Cache Mode. Select the write cache mode for the host volume. Choices are write_cache_enabled,
and write_cache_disabled
Wait Flag. Select wait or nowait. See jobs
Examples
These examples show host volume mount points. Device names can also be used.
AIX
HP-UX
Linux
OpenVMS
Solaris
Tru64 UNIX
Windows
Drive
Drive & folders
Comments
• Associated validation commands.
• Agent and license prerequisites. Requires a host agent.
• Command result value. None. For a complete list, see
• OS specifics. Yes. See examples above.

SetListVariable

Creates a variable assignment and a list of values. The variable can then be entered in arguments
throughout a job rather than entering the individual values.
322
Jobs
SetHostVolumesWriteCacheMode ( ("\\HostA2\/home/cats", "\\HostA2\/home/
dogs"), WRITE_CACHE_ENABLED, NOWAIT )
SetHostVolumesWriteCacheMode ( ("\\HostA2\/users/cats", "\\HostA2\/users/dogs"),
WRITE_CACHE_ENABLED, NOWAIT )
SetHostVolumesWriteCacheMode ( ("\\HostA2\/var/cats", "\\HostA2\/var/dogs"),
WRITE_CACHE_ENABLED, NOWAIT )
SetHostVolumesWriteCacheMode ( ("\\HostA2\CATS", "\\HostA2\DOGS),
WRITE_CACHE_ENABLED, NOWAIT )
SetHostVolumesWriteCacheMode ( ("\\HostA2\/usr/cats", "\\HostA2\/usr/dogs"),
WRITE_CACHE_ENABLED, NOWAIT )
SetHostVolumesWriteCacheMode ( ("\\HostA2\dom01#fset1",
"\\HostA2\dom02#fset1"), WRITE_CACHE_ENABLED, NOWAIT )
SetHostVolumesWriteCacheMode ( ("\\HostA2\E:\", "\\HostA2\K:\"),
WRITE_CACHE_ENABLED, NOWAIT )
SetHostVolumesWriteCacheMode ( ("\\HostA2\E:\pets\cats"
"\\HostA2\E:\pets\dogs"), WRITE_CACHE_ENABLED, NOWAIT )
ValidateHostVolume
wait/no wait argument.
command result values.