Resource Is Not Selectable; Scheduled Job Events Do Not Run - HP 418800-B21 - StorageWorks Modular Smart Array 70 Storage Enclosure User Manual

Procedures
Pausing a job instance from the GUI
1. In the navigation pane, select Jobs to display the Jobs window in the content pane.
2.
Click the Run History tab.
3.
Select the job instance to pause.
4. Do one of the following:
• Select Pause. A confirmation window opens.
• Select Monitor. On the Monitor Job window, click the Pause button. A confirmation window
opens.
5.
Click OK to confirm the action. Execution of the job instance is paused.
Pausing a job instance from the CLUI
1. Open a CLUI window.
2.
Issue a Set Job command. Include the job instance name (or ID) and pause switch.

Resource is not selectable

When a command's argument is not selectable (does not appear in a selection list), you must manually
enter the resource name or a enter variable that represents the resource.
Such circumstances typically occur when one command in a job refers to a resource that is created
by another command in the same job.
Example - Mounting a replica
When a job creates a replica of a disk, the replica will not exist until the job is run. Thus, when editing a
command that refers to the replica, the replica's UNC name does not appear in a selection list. In this
case, you can manually enter the name (as specified by the command that creates it), or reference the
resource by using a variable.
Example - Working with a new DR group
When a job creates a new DR group, a new destination storage volume will not exist until the job is run.
Thus, when editing the commands that refer to the new disks, the disk's UNC name does not appear in a
selection list. Because in this case the new disk cannot be referenced by a variable, you must manually
enter the name (as specified by the command that creates it).

Scheduled job events do not run

Problem
Scheduled job events do not run. In the events pane, the following message appears:
Internal error occurred starting job <job name>.
See events pane.
Explanation / resolution
The security credentials (user name and password) that were saved with scheduled job events may not be
correct. See security credentials for the
1.
Open a scheduled job event. See
2. Enter the correct security credentials (to log on to the replication manager server) and click OK.
3. Repeat for each scheduled job event that has incorrect security credentials.
server.
editing scheduled job events.
HP StorageWorks Replication Solutions Manager 4.0.1
177