Waitvolumegroupnormalization - HP 418800-B21 - StorageWorks Modular Smart Array 70 Storage Enclosure User Manual
Hp storageworks replication solutions manager 4.0.1 user guide (t3680-96308, june 2008)
Hide thumbs
Also See for 418800-B21 - StorageWorks Modular Smart Array 70 Storage Enclosure:
- Command reference manual (207 pages) ,
- Maintenance and service manual (63 pages) ,
- User manual (60 pages)
Table of Contents
Advertisement
Examples
WaitUntil ( "15:30:00" )
WaitUntil ( "2007/10/14 15:30:00" )
Comments
•
Associated validation commands. None
•
Agent and license prerequisites. None
•
Command result value. None. For a complete list, see
•
OS specifics. None
•
The date and time are as reported by the computer on which the Replication Solutions Manager
server is running.
•
If not carefully planned, use of WaitUntil can result in job failures due to timing issues. For
example, HP does not recommend using WaitUntil before replication steps because storage
resources that were validated when the job started may change before the replication operations
are performed, resulting in a job failure.
•
HP recommends using WaitUntil after replication steps and preferably at or near the end of
the job.
WaitVolumeGroupNormalization
Halts a job until all of the storage volumes (virtual disks) that underlie a host volume group are normalized
(unshared). When all of the storage volumes are normalized, the job proceeds to the next step.
Syntax and arguments
When initially inserted into a job, the command syntax and default arguments are:
WaitVolumeGroupNormalization ( %volgroup_unc_name% )
UNC Host Volume Group Name (%volume_group_name%). Select or enter the UNC name of the host
volume group to check for normalization.
Examples
These examples show host volume mount points. Device names can also be used.
AIX
HP-UX
Linux
OpenVMS
Solaris
Tru64 UNIX
Windows
Comments
•
Associated validation commands.
•
Agent and license prerequisites. Requires a host agent.
•
Command result value. None. For a complete list, see
•
OS specifics. Yes. See examples above.
– Halts the job until 15:30 hours (3:30 PM).
– Halts the job until 14 October 2007, 15:30 hours (3:30 PM).
WaitVolumeGroupNormalization ( "\\HostA2\/home/vg02" )
WaitVolumeGroupNormalization ( "\\HostA2\/users/vg02" )
WaitVolumeGroupNormalization ( "\\HostA2\/var/vg02" )
Not applicable
WaitVolumeGroupNormalization ( "\\HostA2\/usr/vg02" )
WaitVolumeGroupNormalization ( "\\HostA2\dom01" )
Not applicable
ValidateHostVolumeGroup
command result
command result
HP StorageWorks Replication Solutions Manager 4.0.1
values.
values.
375
Advertisement
Table of Contents
Troubleshooting
