Wait; Waitdrgroupnormalization - HP 418800-B21 - StorageWorks Modular Smart Array 70 Storage Enclosure Command Reference Manual

• See resource names and UNC

Wait

Halts a job for a period of time. When the time has elapsed, the job proceeds to the next step.
Syntax and arguments
When initially inserted into a job, the command syntax and default arguments are:
Wait ( "0:0:10" )
Timespan. Enter the amount of time to wait. The format is hours:minutes:seconds (hh:mm:ss)
Examples
Wait ( "1:15:0" )
Comments
• Associated validation commands. None
• Agent and license prerequisites. None
• Command result value. None. For a complete list, see
• OS specifics. None

WaitDrGroupNormalization

Halts a job until all of the storage volumes (virtual disks) in a DR group are normalized (unshared). When
all of the volumes are normalized, the job proceeds to the next step.
Syntax and arguments
When initially inserted into a job, the command syntax and default arguments are:
WaitDrGroupNormalization ( %drgroup_unc_name% )
UNC DR Group Name (%drgroup_unc_name%). Select or enter the name of the DR group to check
for normalization.
Examples
WaitDrGroupNormalization ( "\\ArrayA2\DrGrpPets" )
Comments
• Associated validation commands. None
• Agent and license prerequisites. Requires remote replication licenses on the source and
destination storage systems.
• Command result value. None. For a complete list, see
• OS specifics. None
• The storage volumes in the DR group are checked at regular intervals. When all volumes are
normal or unshared, the job proceeds to the next step. While any volume in the DR group is
normalizing or unsharing, the job continues to check.
• See resource names and UNC
194
Job concepts, templates and commands
formats.
– Halts the job for a period of 1 hour, 15 minutes, and 0 seconds.
formats.
command result values.
command result values.