Second Snapclone Of The Same Storage Volume Or Host Volume Fails; Slow Login Times; Unable To Resume A Dr Group - HP 418800-B21 - StorageWorks Modular Smart Array 70 Storage Enclosure User Manual

To correct this problem, perform the following procedure. You must be a member of the server's
Administrators group.
CAUTION:
Performing this procedure requires a reboot.
1. Coordinate reboot activities to avoid disruption of services to others. Ensure that no replication
manager jobs are running or are scheduled to run during the reboot.
2. On the Window-based storage management server, select Start > Control Panel > Regional and
Language Options > Advanced tab.
3.
On the Advanced tab, under Standards and formats, select English (United States).
4.
Click OK and follow the Windows on-screen instructions.
5. When prompted, reboot the computer. Click Yes to complete the change to Windows.
6.
In the replication manager, edit any scheduled job events that had incorrect run times. See
Editing scheduled job
7. If you have previously exported the replication manager database (that included incorrect times),
HP recommends that you perform a new export.

Second snapclone of the same storage volume or host volume fails

Problem
The second snapclone of the same storage volume or host volume fails and the replication manager
logs a message like:
Copy type CLONE not available or no resource bundle
Explanation / resolution
You can make multiple snapclones of a source volume. However, only one snapclone can be in the
normalization (unsharing) phase at one time. If the second snapclone action is started too soon, the
action can fail.
This issue can occur when:
• You run and then quickly rerun the same job.
• The replication manager database was not refreshed after the first snapclone was completed.
When the second snapclone is requested, the replication manager encounters the out-of-date
normalization status in the database and fails the requested snapclone action.
To resolve this issue:
• Allow sufficient time after between snapclones to allow the unsharing process to complete.
• Allow sufficient time between snapclones to allow the replication manager database to be
refreshed.

Slow login times

Problem
After entering a user name and password to log in to the replication manager server, there is no response
for 30 seconds or more.
Explanation / resolution
In some cases, a slow login response can occur. This does not indicate that the server application
has stopped.

Unable to resume a DR group

Problem
events.
HP StorageWorks Replication Solutions Manager 4.0.1
51