7 Managed sets
Working with managed sets
About managed sets
The Managed Sets content pane displays resource sets that you can interact with through the replication
manager. See GUI window
Views
•
List of all managed sets. See managed sets
•
Members in a managed set. See managed sets members.
Actions
•
Actions in the GUI. See managed sets
•
You can also interact with Managed Sets from the CLUI. See managed sets
Properties
•
Properties displayed in the GUI. See managed sets
•
You can also display properties from the CLUI. See the CLUI command Show Managed_Set.
Managed set actions summary
The following actions are available on the Managed Sets content pane and allows you to edit
the managed set name. Some actions have equivalent job commands or CLUI commands. See
Managed sets actions cross
•
View/Edit Properties. Displays the properties of the selected managed set. Procedure.
•
New. Create a managed set. Procedure.
•
Delete. Delete a managed set. Procedure.
•
Remove Member. Remove a resource from a managed set. Procedure.
The following actions are available on the resource content panes. Some actions have equivalent job
commands or CLUI commands
•
Add To Managed Set. See
disks.
•
Remove From Managed Set. See
and virtual disks.
Managed set actions cross reference
You can work with managed sets using GUI actions, jobs and CLUI commands. This table provides a
cross reference for performing typical tasks.
content
pane.
list
view.
actions
summary.
reference.
DR
groups,
enabled
hosts,
DR
groups,
enabled
HP StorageWorks Replication Solutions Manager 4.0.1
actions cross
properties
summary.
host
volumes,
storage
hosts,
host
volumes,
reference.
systems, and virtual
storage
systems,
377