Syntax and arguments
When initially inserted into a job, the command syntax and default arguments are:
PresentStorageVolume ( %storvol_unc_name%, %host_name%, 0, READ_WRITE )
UNC Storage Volume Name ( %storvol_unc_name%). Select or enter the full UNC name of the storage
volume (virtual disk) whose presentation you want to begin.
Host_Name (%host_name%). Select or enter the name of the host for which the storage volume (virtual
disk) presentation is to begin.
LUN Number. Select or enter a presentation LUN for the storage volume. The LUN cannot already be in
use when the job is run. You can allow storage controller software to assign a LUN.
Access Type. Select or enter the type of host I/O to allow with the storage volume. Choices are none,
read, and read_write.
Examples
PresentStorageVolume ( "\\ArrayA2\Cats", "HostA6", 12, READ_WRITE )
Comments
•
Associated validation commands. ValidateHost,
•
Agent and license prerequisites. None
•
Command result value. None. For a complete list, see
•
OS specifics. None
•
CAUTION:
Ensure that the storage volume is not already presented to the host. Multiple presentations to the
same host can cause errors.
•
See
resource names and UNC
PresentStorageVolumes
Begins the presentation of storage volumes to an enabled host.
Syntax and arguments
When initially inserted into a job, the command syntax and default arguments are:
PresentStorageVolumes ( %storvol_unc_list%, %host_name% )
Storage Volume List (%storvols_unc_list%). Select or enter the UNC names of storage volumes to be
presented. See
volumes.
Host_Name (%host_name%). Select or enter the name of the host for which the storage volumes (virtual
disks) presentation is to begin.
Examples
PresentStorageVolumes ( ("\\Array2\Cats", "\\Array2\Dogs"), "HostA4" )
PresentStorageVolumes ( $my_svol_list )
formats.
argument
lists. Or, select a variable used in a prior step that represents the storage
ValidateStorageVolume
command result
HP StorageWorks Replication Solutions Manager 4.0.1
values.
307