Createhostvolumefromdiskdevices - HP 418800-B21 - StorageWorks Modular Smart Array 70 Storage Enclosure User Manual

Storage Volume UNC Name (%storvol_unc_name%). Select or enter the UNC name of the storage
volume that underlies the host volume.
Target Host (%target_host%). Select or enter the name of the enabled host to which the storage volume is
to be presented.
Examples
AIX
HP-UX
Linux
OpenVMS
Solaris
Tru64 UNIX
Windows
Comments
• Associated validation commands. ValidateHost, ValidateHostVolume,
• Agent and license prerequisites. Requires a host agent.
• Command result value. Host volume name (UNC). For a complete list, see
• OS specifics. Yes. See examples above.
HP-UX. This command is not supported with HP-UX hosts.
OpenVMS. This command is not supported with OpenVMS hosts.
Tru64 UNIX
• The Partition/Slice (%component%) value must be 0 (zero).
• The command supports only host volumes with UFS file systems. AdvFS is not supported.
• The storage volume is presented to the target host. A new host volume is created using the
specified partition/slice structure. The new host volume is not mounted.
• To mount the host volume, use the
• See also CreateHostVolume.
• See resource names and UNC

CreateHostVolumeFromDiskDevices

Uses replicated storage volumes to create a new host volume on an enabled host. The replicated storage
volumes must have been presented to the host and a host bus scan performed in prior steps in the job.
Syntax and arguments
When initially inserted into a job, the command syntax and default arguments are:
CreateHostVolumeFromDiskDevices ( %src_hostvol_unc%, %storvol_unc_list%, %target_host% )
Source UNC Host Volume (%src_hostvol_unc%). Select or enter the UNC name of a host volume that has
been previously replicated and presented within the job.
Storage Volume List (%storvol_unc_list%). Select or enter the variable assigned to the previous replication
in the job. See
Target Host (%target_host%). Select or enter the name or IP address of the enabled host on which the
host volume is to be created.
CreateHostVolumeDiscrete ( "1", "\\ArrayA2\Cats", "HostA4" )
Not supported.
CreateHostVolumeDiscrete ( "7", "\\ArrayA2\Cats", "HostA4" )
Not supported
CreateHostVolumeDiscrete ( "7", "\\ArrayA2\Cats", "HostA4" )
CreateHostVolumeDiscrete ( "0", "\\ArrayA2\Cats", "HostA4" )
CreateHostVolumeDiscrete ( "1", "\\ArrayA2\Cats", "HostA4" )
MountHostVolume
formats.
argument list.
command.
HP StorageWorks Replication Solutions Manager 4.0.1
ValidateStorageVolume
command result values.
271