Show Controllers Backplane Ethernet Local Multicast Groups - Cisco ASR 9000 Series Manual

Internal Ethernet Control Network Commands on the Cisco ASR 9000 Series Router

show controllers backplane ethernet local multicast groups

To display all multicast addresses currently being used by active interfaces on the router, use the show
controllers backplane ethernet local multicast groups command in EXEC mode.
show controllers backplane ethernet local multicast groups
Syntax Description
This command has no keywords or arguments.
Command Modes
EXEC
Command History
Release
Release 3.7.2
Usage Guidelines
Examples The following example shows the output from the show controllers backplane ethernet local multicast
groups command:
RP/0/RSP0/CPU0:router# show controllers backplane ethernet local multicast groups
------------------------------------------------------------------------------
FastEthernet0_RP1_CPU0
--More--
OL-24762-01
Intf
Name
0100.0000.0064
0100.0000.0065
0100.0000.0066
0100.0000.0068
0100.0000.006a
0100.0000.006c
0100.0000.006e
0100.0000.0070
0100.0000.0072
0100.0000.2774
0100.0000.2775
0100.0000.2776
0100.0000.2778
0100.0000.277a
0100.0000.277c
0100.0000.277e
0100.0000.2780
0100.0000.2782
0100.0000.2784
0100.0000.2786
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference
show controllers backplane ethernet local multicast groups
Modification
This command was introduced.
Multicast Client registered for this address
address Id Name
2 GSP
2 GSP
2 GSP
2 GSP
2 GSP
2 GSP
2 GSP
2 GSP
2 GSP
2 GSP
2 GSP
2 GSP
2 GSP
2 GSP
2 GSP
2 GSP
2 GSP
2 GSP
2 GSP
2 GSP
9