Removing And Replacing The Hp P4800 G2 Solution Components; Additional Component Removal And Replacement Instructions; Identifying Hot Pluggable And Non-Hot Pluggable Components; Replacing The Server Blade And Server Blade Components - HP P4800 G2 Maintenance Manual

San solution for bladesystem
Hide thumbs Also See for P4800 G2:
Table of Contents

Advertisement

4 Removing and replacing the HP P4800 G2 solution
components
This section contains information and procedures specific to replacing the HP P4800 G2 solution
components.

Additional component removal and replacement instructions

For detailed information about the removal and replacement of HP P4800 G2 solution components,
see the resources listed in
SAN Solution for BladeSystem documentation CD that accompanies the HP P4800 G2 solution.
Table 4 Component removal and replacement instructions
Component
HP P4460sb G2 server blade
HP P4000sb server blade
HP SAS switch (pass-through modules)
HP Smart Array P700m controller
HP disk enclosures
HP c-Class blade enclosure
HP Smart Array P410i controller (BIOS boot
controller)

Identifying hot pluggable and non-hot pluggable components

IMPORTANT:
G2 SAS BladeSystem SAN Solution.
The following HP P4800 G2 solution components are hot-pluggable; therefore, you do not need
to power down the device before replacing a part:
Drives
External fans
Power supplies
Blade disk drives
All other HP P4800 G2 solution components are not hot-pluggable. You must first power down
the device before replacing a part.
CAUTION:
of the SAS fabric, including the SAS switches, SAS cables, and I/O modules on the disk enclosure,
first power down the server blades using the procedures to shut down the management group in
the CMC Online Help or HP P4000 SAN Solution User Guide.

Replacing the server blade and server blade components

For more detailed instructions on replacing the server blade or server blade components, see
Table 4 (page 20)
20

Removing and replacing the HP P4800 G2 solution components

Table 4 (page
Hot add and hot removal of the disk enclosures are not supported by HP P4800
To prevent losing access to data during any maintenance operation on components
for resources.
20). These documents are located on the HP P4800 G2
Resource
HP ProLiant BL460c G7 Server Blade Maintenance and Service Guide
HP ProLiant BL460c G6 Server Blade Maintenance and Service Guide
HP 3Gb SAS BL Switch Replacement Instructions
HP Smart Array Controllers for HP ProLiant Servers User Guide
HP 600 Modular Disk System Maintenance and Service Guide
HP BladeSystem c7000 Enclosure Maintenance and Service Guide
HP Smart Array Controllers for HP ProLiant Servers User Guide

Advertisement

Table of Contents
loading

Table of Contents