Pressing The Power On/Standby Button; Removing The Server Blade From The Server Blade Enclosure - HP ProLiant BL20p Maintenance And Service Manual

Figure 2-1: Pressing the Power On/Standby button
3. Remove the server blade from the server blade enclosure:
a. Press the release button (1).
b. Open the lever (2).
c. Grasp the lever and slide the server blade from the enclosure (3). Place a hand under
Figure 2-2: Removing the server blade from the server blade
enclosure
d. Place the server blade on a flat, level surface.
HP ProLiant BL20p Generation 2 Server Blade Maintenance and Service Guide
HP CONFIDENTIAL Codename: Part Number: 316078-001 Last Saved On: 4/3/03 1:22 PM
CAUTION: After you press the release button, the server blade is unlocked from the
enclosure. Use both hands to support the server blade when you remove it from the rack.
the server blade to support it as you remove it from the enclosure.
Removal and Replacement Procedures
2-5