Fujitsu Isis Scanner Driver - Fujitsu fi-5120C Operator's Manual

fi-5120C / fi-5220C Image Scanner Operator
Guide
2.5 How to Use the Scanner Driver (7)

FUJITSU ISIS Scanner Driver

FUJITSU ISIS Scanner Driver is designed for scanning documents with FUJITSU image scanner fi series by using application
software that complies with the ISIS standard.
The following describes the procedure with examples of QuickScan for ordinary scanning by using this driver software.
The procedure may vary depending on your application. If you use an application other than QuickScan, please refer to its
Guide or Help for further information.
1. Procedure for Basic Scanning Operation
Startup the application.
From the [Start] menu, select [Programs] - [QuickScan] and click [QuickScan].
Select your scanner on the window below.
Select [Scan] - [Select Scanner] on the menu bar.
Select the scanner to use (fi-5120C or fi-5220C) then click the [OK] button.
Select [Scan] - [New Batch] on the menu bar.
1 2 3 4 5 6
1 2 3 4 5 6
All Rights Reserved Copyright 2006-2009 © PFU LIMITED
8 9 10 11
7
8 9 10 11
7
TROUBLE SHOOTING
CONTENTS MAP
TOP
12 13 14 15
12 13 14 15