Installing The Fujitsu Isis Scanner Driver - Fujitsu FI-4860C2 Installation Manual

If the scanning is completed without any troubles, the installation was
performed successfully.
For details on various types of scanning, refer to the "fi-4860C2 Operator's
Guide" on the Setup CD-ROM.
For FUJITSU ISIS Scanner Driver
■ Preparation
Confirm the following items before starting to install the application.
Prepare the Setup CD-ROM at hand. (Do not insert the Setup CD-ROM into the CD
•
drive yet).
Confirm that the scanner is correctly connected to your PC.
•
HINT

■ Installing the FUJITSU ISIS Scanner Driver

HINT
1. Turn on the scanner.
Press the side of " | " on the Main line switch.
28 2.3 Installing the Scanner Driver and Application
For details on how to connect the scanner, refer to "2.2 Connecting the
Scanner" on page 13.
Windows XP screenshots are used in this section. The windows and oper-
ations may slightly vary depending on your OS.