Table of Contents
Advertisement
12. Upon successful completion of the build process, the disk array changes to "ready" status.
Set the BIOS Boot Order
This step requires entering your system BIOS and setting the proper boot priority. This step may
differ from system to system. Refer to your system documentation for details. The example below
refers to the Intel SCB2 server board.
1. During POST, press <F2> to enter the BIOS Setup Utility.
2. Navigate to the "Boot" menu, then access the "Boot Device Priority" submenu and set the
following order:
•
Removable Devices
•
ATAPI CD-ROM Drive
•
Hard Drive
•
®
Intel
Boot Agent
Getting Started
39
Advertisement
Table of Contents
