Table of Contents
Advertisement
Build/Rebuild Progress
Whenever an array drive is in the build or rebuild state, you can select Build/Rebuild Progress to
get progress information and estimates for the required time to build or rebuild.
Create New Array Drive
In Advanced Setup, select Configure Array Drives and hit <Enter>. The Select Array Drive
window appears. StorCon lists all logical drives which are free (not yet part of an array or host
drive). The selection bar is moved with the arrow up/down keys and a logical drive is
selected/deselected with the space bar.
For a striping array (RAID 0, 4, 5, 10), the master drive (indicated by 'M') is the first logical drive
in the array (see Figure 61). For a RAID 1 array (mirroring) the master drive is the first logical
drive in the array that contains the valid data copied to the second logical drive.
Storage Console
Figure 59. Create New Array Drive
117
Advertisement
Table of Contents
