Table of Contents
Advertisement
Installing the Intel RAID Controller SRCMR Tools Kit Package
✏
NOTE
STORCON.NLM will not find any controllers unless SRCRX.HAM is already loaded and running.
1. Select Product options, then Install a product not listed.
2. Change the path to A:\INSTALL and press <Enter> to continue.
3. Select Storage RAID Controller Tools Kit (STORCON.NLM) by setting the cursor on its menu
item and pressing the space bar (an X will appear in the item's checkbox).
4. Press <F10> to accept the selected item.
5. NetWare will copy the necessary files, automatically load STORCON.NLM, and modify the
AUTOEXEC.NCF file to load STORCON.NLM for each subsequent restart of the server.
Configuring Tools for Remote Access
1. Create a group SRC_Operator in the NDS.
2. Add the Admin and all other users who will use this interface.
3. Load SRCIPX.NLM.
4. Start Storage Console (STORCON.exe) or Storage Console Plus (Storcon+.exe) from a
workstation using a user name of the group SRC_Operator and his/her NetWare password.
ASPI Support for NetWare 5.1
You will need to ensure that the file NWASPI.CDM is in the server's search path. For
NetWare 5.1, copy NWASPI.CDM into the server's startup directory from
C:\NWSERVER\DRIVERS.
✏
NOTE
Since the debut of Media Manager (MM.NLM) and the NetWare Peripheral Architecture
(NWPA.NLM), the need for ASPI in NetWare is rare. However, there may be a few applications
that require ASPI. Unless your application(s) require it, do not install ASPI.
This procedure describes how to manually install Novell's ASPI manager module, but be aware
that you may need to follow specific instructions from your application vendor to correctly
configure ASPI.
1. With the server loaded and running, load NWCONFIG.NLM (NetWare 5.1).
2. Select NCF Files Option from the main menu.
3. Select Edit Startup.ncf.
4. Add the following line at the end of the .CDM section of STARTUP.NCF:
LOAD NWASPI.CDM
5. Reboot the server.
64
Intel RAID Controller SRCMR User's Guide
Advertisement
Table of Contents
