Table of Contents
Advertisement
Enclosure Status
After selecting this option you can either view the Enclosure Status or view/configure the enclosure
slots. Before you can use the auto hot plug with a SAF-TE subsystem, you must configure the
subsystem (more precisely it's intelligence, the so-called SEP SAF-TE Enclosure Processor). See
Figure 47.
✏
NOTE
Non-initialized disks can not be configured as no RAID configuration information can be stored on
these disks.
To assign a specific hard disk to a SAF-TE enclosure slot, press <Enter> on the empty slot and
choose one of the hard disks. See Figure 48.
108
Figure 47. Enclosure Status
Figure 48. Enclosure Slots
Intel RAID Controller SRCMR User's Guide
Advertisement
Table of Contents
