Loading The Storcon Program Under Windows 95/98; Loading Storcon Under Linux - Intel SRCMR - RAID Controller User Manual

b. The Select Components screen will launch. Remove the check from the check box in front
of each component that you wish to remove. Do not remove the check from the check box
in front of the RAID Device Drivers component unless you intend to remove the device
drivers. Note: If you remove the device drivers and you are booting to a host drive,
you will be unable to reboot back into Windows. The operating system will be
inaccessible. Click Next.
c. A Question Box will appear if you have deselected the Storage Consoles. Click Yes to
continue the uninstall.
d. A window titled InstallShield Wizard Complete will appear. Click Finish to close the
window.
5. After file removal finishes, reboot the computer to complete the uninstall.

Loading the StorCon Program Under Windows 95/98

The StorCon program for Windows 95/98 is part of the Intel RAID Controller SRCMR System
CD-ROM. To load the program under Windows 95/98, type the following command at the prompt:
StorCon <Enter>
✏
NOTE
To monitor the server(s) remotely using StorCon, load MON4SOCK.DLL in the same directory as
StorCon. It supports SPX
MON4NETB.DLL).

Loading StorCon Under Linux

The Intel RAID Controller SRCMR System CD-ROM for Linux includes the archive:
•
StorCon.tgz StorCon and object files (intel).
•
This archive includes all object files to create StorCon, as well as an executable StorCon
compiled on a current Linux version.
Load StorCon by typing the following at the prompt:
StorCon <Enter>
✏
NOTE
To monitor the server(s) remotely using StorCon, load MON4SOCK.DLL in the same directory as
StorCon. This DLL supports SPX/IPX and TCP/IP network protocols (for NetBIOS you can load
instead MON4NETB.DLL).
80
†
/IPX and TCP/IP network protocols (for NetBIOS you can load instead
Intel RAID Controller SRCMR User's Guide