Create A New Host Drive - Intel SRCMR - RAID Controller User Manual

Figure 91. Create a New Host Drive
On the left side of the window are the available physical drives. Under the drives you can see their
physical coordinates (channel/ID/LUN), the manufacturer and the vendor-unique name. On the
right side you see a list of all possible host drive types which can be configured. When there is no
physical drive selected in the left box, all possibilities are disabled. While selecting physical drives
for the new host drive, more attributes become selectable.
You can select a single physical drive by clicking on it. If you want to select more than one
physical drive, simply draw a frame around the physical drives, or press the <Ctrl> key and then
click on all the physical drives you want to combine to a new array.
When you have finished the selection of the physical drives, choose the type of host drive you want
to create and click on OK.
If the selected host drive uses data striping (RAID 0, 4, 5 or 10) you can change the default striping
size. If you have selected a configuration with hot fix terms_hot_fix drives, you can choose
between a private hot fix drive or a pool hot fix drive. After the host drive was created, you can
partition and format the host drive with the corresponding operating system utility.
152 Intel RAID Controller SRCMR User's Guide