Installation To An Existing Os; Installing Drivers For Your Intel Raid Controller Srcmr - Intel SRCMR - RAID Controller User Manual

Installation to an Existing OS

This section covers all installations of the Intel RAID Controller SRCMR into computers with
existing (previously installed) operating systems.
Minimum Requirements:
•
Fully functional OS already installed and running on the computer
•
Administrative level privilege on the computer
•
Hard Disk Space: 9 MB Minimum
•
Installed Intel RAID Controller SRCMR
Once all these requirements are met and you are logged on to the computer, continue to the next
section.

Installing Drivers for your Intel RAID Controller SRCMR

Method 1:
1. Insert the RAID Software Suite CD-ROM in CD-ROM drive.
2. If the CD does not start automatically, then run the following file: \autorun.exe.
3. Click OS Diskette, then click on Windows. Select the appropriate Windows version.
4. A command prompt window appears requesting that you insert a formatted floppy diskette.
5. Insert the floppy in the floppy drive and press <Enter>. The command prompt window closes
automatically after the diskette has been written.
6. Open the Device Manager for your given OS and scan the PCI bus for new hardware.
7. Select the Intel RAID Controller SRCMR in the 'hardware found' list, and then click Next.
8. Select Search for a suitable driver for my device, and then click Next.
9. Select Floppy Drive.
10. Click on Next and follow the instructions up to and including system reboot.
Method 2:
1. Insert the RAID Software Suite CD-ROM in CD-ROM drive.
2. Run the following file: \windows\install\setup.exe.
3. InstallShield Wizard starts. Select Modify. Click on Next.
4. The Select Components window appears. Select Device Drivers.
5. Click on Next and follow the instructions up to and including system reboot.
Installing Microsoft Windows NT or Windows 2000 51