Table of Contents
Advertisement
Advanced Setup
Configure Controller
Controller Settings
Use the Controller Settings dialog to change Intel RAID Controller SRCMR parameters and
settings. All information concerning physical, logical, array and host drives are stored twice
(primary and secondary configuration data) on each hard disk. For example, the Intel RAID
Controller SRCMR itself carries no configuration data of a specific disk array. For this reason the
migration of host drives between Intel RAID Controller SRCMRs is very easy and secure, even if
the SCSI IDs and channels are changed. Simply connect the hard disks to the new Intel RAID
Controller SRCMR, and the host drives will be automatically available. See Figure 38.
Table 15.
Controller Settings
Parameter
Alternatives
Cache
On
Off
Delayed Write
On
Off
BIOS
Enabled
Disabled
Removed
Storage Console
Figure 38. Controller Settings Dialog
Description
Intel RAID Controller SRCMR cache (write and read cache) On
Intel RAID Controller SRCMR cache (write and read cache) Off
Write cache On
Write cache Off
BIOS enabled
BIOS disabled, but <Ctrl> + <g> allowed
BIOS and <Ctrl> + <g> disabled
continued
99
Advertisement
Table of Contents
Need help?
Do you have a question about the SRCMR - RAID Controller and is the answer not in the manual?