Installing An Os Onto An Ide Or Scsi Disk Drive Not Attached To The Intel Raid Controller Srcmr; Windows 2000 / Nt 4.0 Installation Procedures - Intel SRCMR - RAID Controller User Manual

5. After the operating system is completely installed, go to Chapter 7, Loading StorCon to
complete the installation.
Installing Windows Using the Bootable Windows CD-ROM:
1. Press F6 as soon as the initial blue screen appears to ensure that the RAID Driver Installation
diskette can be loaded when specifying Other.
2. When device detection is complete, press S to specify additional storage devices.
3. Select Other. Insert the Intel RAID Controller SRCMR Installation diskette for Windows into
the floppy drive. Press <Enter>.
4. Intel RAID Controller SRCMR is automatically selected. Press <Enter>.
5. Complete the text-based portion of the Windows installation procedures. Reboot and continue
with the GUI-based portion of the installation.
6. After the operating system is completely installed, go to Chapter 7, Loading StorCon to
complete the installation.
Installing an OS onto an IDE or SCSI Disk Drive Not Attached to the Intel
RAID Controller SRCMR
Install the Intel RAID Controller SRCMR:
1. Power-off the computer.
2. Disconnect all power cords.
3. Remove the computer case to expose the server board inside. Observe all warnings and
cautions documented with your computer system to avoid shock hazards.
4. Install the Intel RAID Controller SRCMR into a Zero channel RAID compatible PCI slot.
5. Replace the computer case and reconnect power cords.
6. Go to the next section for your operating system to continue the installation.

Windows 2000 / NT 4.0 Installation Procedures

✏
NOTE
This document, when referring to Windows 2000 and Windows NT, applies to the following
Windows operating systems:
•
Windows 2000 Server, Advanced Server, and Professional
•
Windows NT 4.0 Server, Enterprise Edition, Terminal Server Edition, and Workstation
Installing the Operating System:
The following installation procedures highlight the Windows setup options that you must install to
successfully prepare the operating system for the installation of the RAID Software Suite.
✏
NOTE
For detailed Windows installation procedures, please consult the documentation that came with
your computer system or operating system.
Install the operating system software using one of the scenarios (boot diskettes or CD-ROM) below
that matches your installation method.
48 Intel RAID Controller SRCMR User's Guide