Authentication Default Configuration - Cisco WS-C4003 - Catalyst 4000 Chassis Switch Software Configuration Manual

Configuring Authentication

Authentication Default Configuration

Table 27-3
Table 27-3 Default Authentication Configuration
Feature
Login authentication (console and Telnet)
Local authentication (console and Telnet)
TACACS+ login authentication (console and Telnet)
TACACS+ enable authentication (console and Telnet)
TACACS+ key
TACACS+ login attempts
TACACS+ server timeout
TACACS+ directed request
RADIUS login authentication (console and Telnet)
RADIUS enable authentication (console and Telnet)
RADIUS server IP address
RADIUS server UDP auth-port
RADIUS key
RADIUS server timeout
RADIUS server deadtime
RADIUS retransmit attempts
Kerberos login authentication (console and Telnet)
Kerberos enable authentication (console and Telnet)
Kerberos server IP address
Kerberos DES key
Kerberos server auth-port
Kerberos local-realm name
Kerberos credentials forwarding
Kerberos clients mandatory
Kerberos preauthentication
802.1x port control
802.1x multiple hosts
802.1x system authentication control
802.1x quiet period time
802.1x authenticator to supplicant retransmission time
802.1x backend authenticator to supplicant retransmission time 30 seconds
802.1x backend authenticator to authentication server
retransmission time
Software Configuration Guide—Catalyst 4000 Family, Catalyst 2948G, Catalyst 2980G, Releases 6.3 and 6.4
27-10
shows the default configuration for authentication.
Chapter 27 Configuring Switch Access Using AAA
Default Value
Enabled
Enabled
Disabled
Disabled
None specified
3
5 seconds
Disabled
Disabled
Disabled
None specified
Port 1812
None specified
5 seconds
0 (servers not marked dead)
2 times
Disabled
Disabled
None specified
None specified
Port 750
NULL string
Disabled
Not mandatory
Disabled
Force-Authorized
Disabled
Enable
60 seconds
30 seconds
30 seconds
78-12647-02