Disabling Tacacs+ Authorization - Cisco WS-C4003 - Catalyst 4000 Chassis Switch Software Configuration Manual

Chapter 27 Configuring Switch Access Using AAA
all:
Console:
--------
exec:
enable:
commands:
config:
all:
Console> (enable)

Disabling TACACS+ Authorization

To disable TACACS+ authorization on the switch, perform this task in privileged mode:
Task
Step 1 Disable authorization for normal mode. Use the
console or telnet keywords if you want to disable
authorization only for console port or Telnet
connection attempts. Use the both keyword to
enable authorization for both console port and
Telnet connection attempts.
Step 2
Disable authorization for enable mode. Use the
console or telnet keywords if you want to disable
authorization only for console port or Telnet
connection attempts. Use the both keyword to
enable authorization for both console port and
Telnet connection attempts.
Step 3 Disable authorization of configuration
commands. Use the console or telnet keywords if
you want to disable authorization only for console
port or Telnet connection attempts. Use the both
keyword to enable authorization for both console
port and Telnet connection attempts.
Step 4
Verify the TACACS+ authorization configuration. show authorization
This example shows how to disable TACACS+ EXEC mode authorization for both console and Telnet
connections and how to verify the configuration:
Console> (enable) set authorization exec disable both
Successfully disabled enable authorization.
Console> (enable)
This example shows how to disable TACACS+ enable mode authorization for both console and Telnet
connections and how to verify the configuration:
Console> (enable) set authorization enable disable both
Successfully disabled enable authorization.
Console> (enable)
78-12647-02
- -
Primary Fallback
------- --------
tacacs+ deny
tacacs+ deny
tacacs+ deny
- -
Software Configuration Guide—Catalyst 4000 Family, Catalyst 2948G, Catalyst 2980G, Releases 6.3 and 6.4
Command
set authorization exec disable [console | telnet |
both]
set authorization enable disable [console |
telnet | both]
set authorization commands disable [console |
telnet | both]
Configuring Authorization
27-53