Table of Contents
Advertisement
Working with System Software Images
This chapter describes how to work with system software image files on the Catalyst enterprise LAN
switches.
Note
For complete syntax and usage information for the commands used in this chapter, refer to the Command
Reference—Catalyst 4000 Family, Catalyst 2948G, and Catalyst 2980G Switches.
This chapter consists of these sections:
•
•
•
•
•
Software Image Naming Conventions
The software images on the Catalyst 4000 family switches use the following naming conventions
(software release 6.1(3) is used in the examples):
•
•
•
Downloading System Software Images to the Switch
Using TFTP
These sections describe how to download system software images to the switch supervisor engine and
to intelligent modules:
•
•
78-12647-02
Software Image Naming Conventions, page 29-1
Downloading System Software Images to the Switch Using TFTP, page 29-1
Uploading System Software Images to a TFTP Server, page 29-5
Downloading System Software Images to the Switch Using rcp, page 29-6
Uploading System Software Images to an rcp Server, page 29-9
6.1(3) Flash image (standard)—cat4000.6-1-3.bin
6.1(3) Flash image (CiscoView)—cat4000-cv.6-1-3.bin
6.1(3) Flash image (Secure Shell)—cat4000-k9.6-1-3.bin
Understanding How TFTP Software Image Downloads Work, page 29-2
Preparing to Download an Image Using TFTP, page 29-2
Software Configuration Guide—Catalyst 4000 Family, Catalyst 2948G, Catalyst 2980G, Releases 6.3 and 6.4
C H A P T E R
29
29-1
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
