Cisco WS-C4003 - Catalyst 4000 Chassis Switch Software Configuration Manual page 78

Configuring Gigabit Ethernet
This example shows how to ping a remote host and how to trace the hop-by-hop path of packets through
the network using traceroute:
Console> (enable) ping somehost
somehost is alive
Console> (enable) traceroute somehost
traceroute to somehost.company.com (10.1.2.3), 30 hops max, 40 byte packets
1 engineering-1.company.com (173.31.192.206) 2 ms 1 ms 1 ms
2 engineering-2.company.com (173.31.196.204) 2 ms 3 ms 2 ms
3 gateway_a.company.com (173.16.1.201) 6 ms 3 ms 3 ms
4 somehost.company.com (10.1.2.3) 3 ms * 2 ms
Console> (enable)
Software Configuration Guide—Catalyst 4000 Family, Catalyst 2948G, Catalyst 2980G, Releases 6.3 and 6.4
5-10
Chapter 5 Configuring Gigabit Ethernet Switching
78-12647-02