Default Ieee 802.1X Authentication Configuration - Cisco WS-C3020 Software Configuration Manual

Configuring IEEE 802.1x Authentication
•
•
•
•
•
•
•
•
•
•
•
•
•

Default IEEE 802.1x Authentication Configuration

Table 8-2
Table 8-2
Feature
Switch IEEE 802.1x enable state
Per-port IEEE 802.1x enable state
AAA
RADIUS server
•
•
•
Host mode
Control direction
Periodic re-authentication
Number of seconds between
re-authentication attempts
Re-authentication number
Quiet period
Cisco Catalyst Blade Switch 3020 for HP Software Configuration Guide
8-20
Changing the Switch-to-Client Retransmission Time, page 8-30
Setting the Switch-to-Client Frame-Retransmission Number, page 8-31
Setting the Re-Authentication Number, page 8-31
Configuring IEEE 802.1x Accounting, page 8-32
Configuring a Guest VLAN, page 8-33
Configuring a Restricted VLAN, page 8-34
Configuring the Inaccessible Authentication Bypass Feature, page 8-35
Configuring IEEE 802.1x Authentication with WoL, page 8-38
Configuring MAC Authentication Bypass, page 8-38
Configuring NAC Layer 2 IEEE 802.1x Validation, page 8-39
Configuring Web Authentication, page 8-40
Disabling IEEE 802.1x Authentication on the Port, page 8-43
Resetting the IEEE 802.1x Authentication Configuration to the Default Values, page 8-43
shows the default IEEE 802.1x authentication configuration.

Default IEEE 802.1x Authentication Configuration

IP address
UDP authentication port
Key
Chapter 8 Configuring IEEE 802.1x Port-Based Authentication
(optional)
(optional)
(optional)
(optional)
(optional)
(optional)
(optional)
(optional)
(optional)
(optional)
Default Setting
Disabled.
Disabled (force-authorized).
The port sends and receives normal traffic without IEEE
802.1x-based authentication of the client.
Disabled.
• None specified.
1812.
•
None specified.
•
Single-host mode.
Bidirectional control.
Disabled.
3600 seconds.
2 times (number of times that the switch restarts the
authentication process before the port changes to the
unauthorized state).
60 seconds (number of seconds that the switch remains in
the quiet state following a failed authentication exchange
with the client).
(optional)
(optional)
(optional)
OL-8915-03