Default 802.1X Authentication Configuration - Cisco Catalyst 2975 Software Configuration Manual

Chapter 10 Configuring IEEE 802.1x Port-Based Authentication
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•

Default 802.1x Authentication Configuration

Table 10-4
Table 10-4 Default 802.1x Authentication Configuration
Feature
Switch 802.1x enable state
Per-port 802.1x enable state
AAA
OL-19720-02
Configuring 802.1x Violation Modes, page 10-39
Configuring the Switch-to-RADIUS-Server Communication, page 10-41
Configuring the Host Mode, page 10-43
Configuring Periodic Re-Authentication, page 10-44
Manually Re-Authenticating a Client Connected to a Port, page 10-45
Changing the Quiet Period, page 10-45
Changing the Switch-to-Client Retransmission Time, page 10-46
Setting the Switch-to-Client Frame-Retransmission Number, page 10-47
Setting the Re-Authentication Number, page 10-47
Configuring 802.1x Accounting, page 10-49
Enabling MAC Move, page 10-48
Enabling MAC Replace, page 10-48
Configuring a Guest VLAN, page 10-50
Configuring a Restricted VLAN, page 10-51
Configuring the Inaccessible Authentication Bypass Feature, page 10-53
Configuring 802.1x Authentication with WoL, page 10-56
Configuring MAC Authentication Bypass, page 10-57
Configuring NAC Layer 2 802.1x Validation, page 10-59
Configuring an Authenticator and a Supplicant Switch with NEAT, page 10-60
Configuring 802.1x Authentication with Downloadable ACLs and Redirect URLs, page 10-61
Configuring Flexible Authentication Ordering, page 10-64
Disabling 802.1x Authentication on the Port, page 10-65
Resetting the 802.1x Authentication Configuration to the Default Values, page 10-66
shows the default 802.1x authentication configuration.
Default Setting
Disabled.
Disabled (force-authorized).
The port sends and receives normal traffic without 802.1x-based
authentication of the client.
Disabled.
(optional)
(optional)
(optional)
(optional)
(optional)
(optional)
(optional)
(optional)
(optional)
(optional)
(optional)
(optional)
(optional)
(optional)
Catalyst 2975 Switch Software Configuration Guide
Configuring 802.1x Authentication
(required)
(optional)
(optional)
(optional)
(optional)
(optional)
10-33